# NGINX

In order to use NGINX as a reverse proxy for GoToSocial you'll need to have it installed on your server. If you intend for the NGINX instance to also handle TLS, you'll need to [provision TLS certificates](../../advanced/certificates.md) too.

!!! tip
    Enable HTTP/2 in nginx by including `http2` in the `listen` directives. This can speed up the experience for clients. Browsers do not support HTTP/2 over plain text, so this should only be added to `listen` directives for port `443` that also include the `ssl` directive.

NGINX is [packaged for many distributions](https://repology.org/project/nginx/versions). It's very likely you can install it with your distribution's package manager. You can also run NGINX using a container runtime with the [official NGINX image](https://hub.docker.com/_/nginx) that's published to the Docker Hub.

In this guide we'll also show how to use certbot to provision the TLS certificates. It too is [packaged in many distributions](https://repology.org/project/certbot/versions) but many distributions tend to ship fairly old versions of certbot. If you run into trouble it may be worth considering using the [container image](https://hub.docker.com/r/certbot/certbot) instead.

## Configure GoToSocial

If GoToSocial is already running, stop it.

```bash
sudo systemctl stop gotosocial
```

Or if you don't have a systemd service just stop it manually.

Tweak your GoToSocial configuration like so:

```yaml
letsencrypt-enabled: false
port: 8080
bind-address: 127.0.0.1
```

The first setting disables the built-in provisioning of TLS certificates. Since NGINX will now be handling that traffic GoToSocial no longer needs to be bound to port 443, or any privileged port.

By setting the `bind-address` to `127.0.0.1` GoToSocial will no longer be accessible directly from the outside. If your NGINX and GoToSocial instance aren't running on the same server you'll need to bind to an IP address that lets your reverse proxy reach your GoToSocial instance. By binding to a private IP address you can be sure GoToSocial can't be accessed except through NGINX.

## Set up NGINX

First we will set up NGINX to serve GoToSocial as unsecured http and then use Certbot to automatically upgrade it to serve https.

Please do not try to use it until that's done or you'll risk transmitting passwords over clear text, or breaking federation.

First we'll write a configuration for NGINX and put it in `/etc/nginx/sites-available`.

```bash
sudo mkdir -p /etc/nginx/sites-available
sudoedit /etc/nginx/sites-available/yourgotosocial.url.conf
```

In the above commands, replace `yourgotosocial.url` with your actual GoToSocial host value. So if your `host` is set to `example.org`, then the file should be called `/etc/nginx/sites-available/example.org.conf`

The file you're about to create should look like this:

```nginx
server {
  listen 80;
  listen [::]:80;
  server_name example.org;
  location / {
    # set to 127.0.0.1 instead of localhost to work around https://stackoverflow.com/a/52550758
    proxy_pass http://127.0.0.1:8080;
    proxy_set_header Host $host;
    proxy_set_header Upgrade $http_upgrade;
    proxy_set_header Connection "upgrade";
    proxy_set_header X-Forwarded-For $remote_addr;
    proxy_set_header X-Forwarded-Proto $scheme;
  }
  client_max_body_size 40M;
}
```

Change `proxy_pass` to the ip and port that you're actually serving GoToSocial on (if it's not on `127.0.0.1:8080`), and change `server_name` to your own domain name.

If your domain name is `example.org` then `server_name example.org;` would be the correct value.

If you're running GoToSocial on another machine with the local ip of 192.168.178.69 and on port 8080 then `proxy_pass http://192.168.178.69:8080;` would be the correct value.

**Note**: You can remove the line `listen [::]:80;` if your server is not ipv6 capable.

**Note**: `proxy_set_header Host $host;` is essential. It guarantees that the proxy and GoToSocial use the same server name. If not, GoToSocial will build the wrong authentication headers, and all attempts at federation will be rejected with 401.

**Note**: The `Connection` and `Upgrade` headers are used for WebSocket connections. See the [WebSocket docs](websocket.md).

**Note**: `client_max_body_size` is set to 40M in this example, which is the default max video upload size for GoToSocial. You can make this value larger or smaller if necessary. The nginx default is only 1M, which is rather too small.

**Note**: To make `X-Forwarded-For` and rate limiting work, set the `trusted-proxies` configuration variable. See the [rate limiting](../../api/ratelimiting.md) and [general configuration](../../configuration/general.md) docs

Next we'll need to link the file we just created to the folder that nginx reads configurations for active sites from.

```bash
sudo mkdir -p /etc/nginx/sites-enabled
sudo ln -s /etc/nginx/sites-available/yourgotosocial.url.conf /etc/nginx/sites-enabled/
```

Again, replace `yourgotosocial.url` with your actual GoToSocial host value.

Now check for configuration errors.

```bash
sudo nginx -t
```

If everything is fine you should get this as output:

```text
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful
```

Everything working? Great! Then restart nginx to load your new config file.

```bash
sudo systemctl restart nginx
```

## Set up TLS

!!! note
    We have additional documentation on how to [provision TLS certificates](../../advanced/certificates.md) that also provides links to additional content and tutorials for different distributions that may be good to review.

You should now be able to run certbot and it will guide you through the steps required to enable https for your instance.

```bash
sudo certbot --nginx
```

After you do, it should have automatically edited your configuration file to enable https.

Reload NGINX one last time:

```bash
sudo systemctl restart nginx
```

Now start GoToSocial again:

```bash
sudo systemctl start gotosocial
```

## Security hardening

If you want to harden up your NGINX deployment with advanced configuration options, there are many guides online for doing so ([for example](https://beaglesecurity.com/blog/article/nginx-server-security.html)). Try to find one that's up to date. Mozilla also publishes best-practice SSL configuration [here](https://ssl-config.mozilla.org/).

## Results

You should now be able to open the splash page for your instance in your web browser, and will see that it runs under https!

If you open the NGINX config again, you'll see that Certbot added some extra lines to it.

!!! note
    This may look a bit different depending on the options you chose while setting up Certbot, and the NGINX version you're using.

```nginx
server {
  server_name example.org;
  location / {
    # set to 127.0.0.1 instead of localhost to work around https://stackoverflow.com/a/52550758
    proxy_pass http://127.0.0.1:8080;
    proxy_set_header Host $host;
    proxy_set_header Upgrade $http_upgrade;
    proxy_set_header Connection "upgrade";
    proxy_set_header X-Forwarded-For $remote_addr;
    proxy_set_header X-Forwarded-Proto $scheme;
  }
  client_max_body_size 40M;

  listen [::]:443 ssl ipv6only=on http2; # managed by Certbot
  listen 443 ssl http2; # managed by Certbot
  ssl_certificate /etc/letsencrypt/live/example.org/fullchain.pem; # managed by Certbot
  ssl_certificate_key /etc/letsencrypt/live/example.org/privkey.pem; # managed by Certbot
  include /etc/letsencrypt/options-ssl-nginx.conf; # managed by Certbot
  ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; # managed by Certbot
}

server {
  if ($host = example.org) {
      return 301 https://$host$request_uri;
  } # managed by Certbot

  listen 80;
  listen [::]:80;
  server_name example.org;
    return 404; # managed by Certbot
}
```

A number of additional configurations for nginx, including static asset serving and caching, are documented in the [Advanced](../../advanced/index.md) section of our documentation.